The Packard Performance 2017-2019 Can-Am X3 Big Turbo kit is a 100% bolt-on and your Can-Am is a perfect candidate for some bolt-on big hp gains. From our experience, we have found the X3 OEM engine to be a well built and reliable platform from the factory. No motor build necessary, simply bolt on the parts provided in the kit and tell your buddies to stand aside.

Gains:

Due to the variance in dyno hp readings, we do not claim or advertise a specific overall hp you will achieve with this kit but do give you an estimate of 70-80 hp gain from stock with everything working and installed properly.

Kit Includes:

Exhaust Header
Packard Ball Bearing Turbo W/Billet Intake Wheel
3" Stainless downpipe
6" Turn Down Muffler
Billet Muffler Mount
PowerVision CX Tuner w/pump and race gas tunes (optional)
1000cc Injectors
Complete cold air intake
Turbo outlet to intercooler charge tube
Oil Lines
All necessary hardware
BOV (optional)
Clutching (Clutch kit has been updated, this kit no longer contains springs for the primary nor the secondary.)

Recommended Products:

Additional turbo upgrade options available call for details.

Important Notes:

If your X3 is the base non-intercooled model, then an OEM or aftermarket intercooler will be needed in addition to this kit.
The DynoJet Powervision Tuner is required to run this kit if you don't already have one make sure to purchase the BT Kit with DynoJet Powervision Tuner.
Blow off valves are recommended and available as an add on. Many of the aftermarket blow off valves will also work.
Although We have been careful to supply you with the highest quality parts possible, we assume no liability for damage to the unit or personal injury.
Making any modifications to the OEM turbo system, powertrain or fuel system can result in vehicle damage, fire, and or personal injury. With any modification due so with extreme caution and at your own risk!
No returns on turbo kits.
Adding this kit to your vehicle may or may not void your warranty. Check with our Can-Am dealer for more information.
Due to the variance in dyno hp readings, we do not claim or advertise a specific overall hp you will achieve with this kit but do give you an estimate of 70-80 hp gain from stock with everything working and installed properly.
This turbo system is intended for track use only.

ALL SALES ARE FINAL

POWER VISION 3 GAUGE MOUNT KIT FOR CAN-AM MAVERICK X3